首页 产品 新闻 介绍 留言

中频逆变直流点焊机,镍网镍片点焊机,

产品信息

产品详细

TMF系列中频逆变直流点(凸)焊机

TMF Series Medium Frequency Inverter DC Spot welding Machine

特点和用途:

1 、 通电时间短、热效率高、可有效舒缓焊接飞溅、获得稳定高品质的焊接效果,焊接成型美观。

2、 控制精度高,中频点焊机由于工作频率高(通常在1-4KHz),使得反馈控制精度是一般交流点凸 焊机和次级整流点凸焊机的20-80倍,相应的输出控制精度也非常高。

3、逆变点焊机采用三相输入,宜于电网供电平衡,无须电力补偿设备,对电网无干扰。

4、节能:逆变焊机由于热效率高、焊接变压器小、铁损小,焊接同样的工件时,比交流点焊机和次级整流点焊机节能可达30%以上。

5、适用性广:可以焊接铜、铝和镀锌金属等材料,焊接效果良好。尤其适合于三层板焊接、非常薄的材料的焊接以及准确焊接的要求。

Main Features:

1.Current time is short, high thermal efficiency, which can effectively inhibit welding spatter, stability of high quality welding effect, beautiful welding forming

2.Control precision is high, intermediate frequency spot welding machine due to the high working frequency (usually in 1-4 KHZ), the feedback control precision is general ac point convex welder and secondary rectifier point convex welder 20-80 times, the corresponding output is also very high control precision.

3.Inverter spot welding machine adopts three-phase input, like the balance of power supply, no power compensation equipment, no interference of power grids

4.Energy saving: due to the high thermal efficiency, small welding transformer, welding inverter and small iron loss, welding the same artifacts, than ac spot welding machine and secondary rectifying spot welding machine and energy saving can reach more than 30%

5.Wide applicability: can welding materials such as copper, aluminum, and galvanized metal, welding effect is good.Three layer board is especially suitable for welding, welding material is very thin, and the requirements of precision welding

 IMG_8947 副本_meitu_3(加水印).jpg主要技术参数 Main Technical Parameter 

参数/型号

Parameter/model

TMF-50KVA

TMF-90KVA

TMF-150KVA

TMF-170KVA

TMF-250KVA

TMF-300KVA

额定电源

Rated/Voltage

3相,交流电(AC),380------415-----480V,50/60HZ

额定容量

Rated/Capacity

50KVA

90KVA

150KVA

170KVA

250KVA

300KVA

额定占截率

Rated Duty Cycle

50%

50%

50%

50%

50%

50%

非常大焊接电流

Max Welding Current

18500A

23500A

32000A

40500A

56500A

80000A

电较行程

Electrode Stroket

75MM

100MM

电较臂间距

Welding Arm Spacing

260MM

320MM

气源压力

Air Source Pressure

0.6MPa

 

联系方式

相关产品

广州市通骏机械设备有限公司 > 铝产品 > 中频逆变直流点焊机,镍网镍片点焊机,
拨打电话 立即询盘