主营:铝业瓶
所在地:
上海 上海
产品价格:
2600.00元/台(大量采购价格面议)
最小起订:
1
发布时间:
2023-09-11
有效期至:
2023-10-11
产品详细
进口氨用截止阀
进口氨用截止阀|进口液氨截止阀|进口角式氨用截止阀
德国巴赫进口氨用截止阀概述:Introduction of ammonia valve used by Bach in germany:
进口氨用截止阀经常要用到氧气、氮气、氢气、氩气等气体。这些气体一般都是贮存在专项使用的高压气体中。Imported ammonia shut-off valve often use oxygen, nitrogen, hydrogen, argon and other gases. These gases are usually stored in a special high-pressure gas.
进口氨用截止阀主要由阀体、阀盖、阀瓣、阀杆、手轮等零件组成。其密封面采用巴氏合金,具有密封性能稳定、使用安全可靠、耐腐蚀性强、无介质内、外漏以及操作轻便等特点,在使用过程中遇到温差幅度变动环境下,能自然达到化学处理性能。结构新形式,合理的结构性,使用的稳定性。适于温度-40~+150摄氏度的液氨、氨气介质的管路控制接通或截断管路介质的启闭装置。
Imported ammonia stop valve is mainly composed of valve body, valve cover, valve clack, valve stem, handwheel and other parts. The sealing cover adopts Babbitt alloy, which has the characteristics of stable sealing performance, safe and reliable use, strong corrosion resistance, no medium leakage, easy operation and so on. During the process of using the temperature difference amplitude, the chemical treatment performance can be achieved naturally. New form of structure, reasonable structure, stability of use. The pipeline of liquid ammonia and ammonia medium suitable for the temperature -40~+150 degrees Celsius controls the opening and closing device for connecting or cutting off the pipeline medium.
进口氨用截止阀的定义:Definition of imported ammonia stop valve:
1.中通法兰为方形结构,阀杆采用间杆连接。
2.阀体密封面部位采用球凸状,与阀脚以线吻合密封。
3.密封面采用巴氏合金,密封性能好,使用寿命长。
1. through flange is a square structure, the stem is connected by the rod.
2. the ball valve sealing face convex, and the valve to seal foot line anastomosis.
3. sealing surface adopts Babbitt alloy, which has good sealing performance and long service life.
进口氨用截止阀技术参数:Technical parameters of imported ammonia shut-off valve:
产品名称 |
驱动方式 |
连接形式 |
结构形式 |
密封结构 |
压力范围 |
公称通径 |
常用材质 |
产品型号 |
进口氨用截止阀 |
手动 |
法兰 |
阀瓣非平衡式 |
BM |
1.6-4.0MPa |
DN10-350 |
铸钢、不锈钢 |
bach-a |
阀门尺寸标准
|
阀门试验标准
|
阀门交货标准
|
工业阀门标准
|
法兰阀门标准
|
焊接阀门标准
|
对夹式连接阀
|
内螺纹连接阀
|
可以提供美国 |
DIN EN558-2005
|
DIN EN12266-1-2003
|
DIN3230-2-1974
|
DIN EN 1171-2003
|
DIN EN 3202-1977
|
DIN EN 3202-1982
|
DIN EN 3202-1979
|
DIN EN 3202-1977
|
API、ANSI等标准
|