高压角式截止阀欧洲供应商价格

进口高压角式截止阀

德国巴赫进口高压角式截止阀概述：Introduction of Bach high pressure angle globe valve imported from germany:

进口高压角式截止阀的启闭件是塞形的阀瓣，密封面呈平面或锥面，阀瓣沿流体的中心线作直线运动。高压角式截止阀又称角阀，阀杆的运动形式，有升降杆式（阀杆升降，手轮不升降），也有升降旋转杆式（手轮与阀杆一起旋转升降，螺母设在阀体上）。

Imported high-pressure angle type valve opening and closing parts are plug shaped valve, sealing surface flat or cone, fluid along the centerline of the valve for linear motion. High pressure angle globe valve is also called angle valve. The movement form of valve stem is lifting rod type (stem lifting, hand wheel not lifting), also has lifting and rotating rod type (handwheel and valve stem rotating and lifting together, nut on the valve body).只适用于全开和全关，不允许作调节和节流。截止阀属于强制密封式阀门，所以在阀门关闭时，必须向阀瓣施加压力，以强制截止阀的密封面不泄漏。当介质由阀瓣下方进入阀门时，操作力所需克服的阻力，是阀杆和填料的摩擦力与由介质的压力所产生的推力，关“高压角式截止阀” 的力比开“高压角式截止阀”的力大，所以阀杆的直径要大，否则会发生阀杆顶弯的故障。

进口高压角式截止阀的定义：Definition of high pressure angle globe valve:   

进口高压角式截止阀是一种进口和出口呈90°C夹角的截止阀，这种阀门除了具备一般法兰截止阀的优点和使用要求外，非常大的特点就是方便安装在管道系统的拐角处，既节省了90°C的弯头，又方便开闭操作。高压角式截止阀在化肥厂的合成氨系统和制冷系统中等到非常广泛的应用。

The definition of imported high-pressure angle type valve:

Imported high-pressure angle type valve is a valve in the import and export of 90 DEG C angle, in addition to this valve has the advantages of general flange valve and operation requirements, the biggest feature is easy to install in the corner of the pipeline system, not only saves the elbow 90 degrees C, and convenient opening and closing operation. High angle stop valve in the chemical fertilizer plant ammonia system and refrigeration system until a very wide range of applications.

进口高压角式截止阀技术参数Technical parameters of imported high pressure angle globe valve