角式氨用截止阀欧洲供应商价格

进口角式氨用截止阀

德国巴赫进口角式氨用截止阀概述：Introduction of Bach imported angle type ammonia globe valve:

进口角式氨用截止阀经常要用到氧气、氮气、氢气、氩气等气体。这些气体一般都是贮存在专项使用的高压气体中。

Inlet angle type ammonia globe valve often uses oxygen, nitrogen, hydrogen, argon and other gases. These gases are usually stored in a special high-pressure gas.
进口角式氨用截止阀主要由阀体、阀盖、阀瓣、阀杆、手轮等零件组成。其密封面采用巴氏合金，具有密封性能稳定、使用安全可靠、耐腐蚀性强、无介质内、外漏以及操作轻便等特点，在使用过程中遇到温差幅度变动环境下，能自然达到化学处理性能。Imported angle type ammonia stop valve is mainly composed of valve body, valve cover, valve clack, valve stem, hand wheel and other parts. The sealing cover adopts Babbitt alloy, which has the characteristics of stable sealing performance, safe and reliable use, strong corrosion resistance, no medium leakage, easy operation and so on. During the process of using the temperature difference amplitude, the chemical treatment performance can be achieved naturally.

  结构新形式，合理的结构性，使用的稳定性。适于温度-40~+150摄氏度的液氨、氨气介质的管路控制接通或截断管路介质的启闭装置。

进口角式氨用截止阀的定义： Definition of inlet angle type ammonia stop valve:  

1、密封性好，密封面间磨擦力小，寿命较长。
2、中通法兰为方形结构，阀杆采用间杆连接。
3、密封面采用巴氏合金，密封性能好，使用寿命长。
4、阀体密封面部位采用球凸状，与阀脚以线吻合密封。
5、阀杆开启或关闭行程相对较短，并具有非常可靠的切断动作。

The definition of valve inlet angle with ammonia:

2、1, good sealing, sealing surface friction force is small, longer life.

3、2, the middle flange is a square structure, the valve stem connection.

4、3, sealing surface using Babbitt alloy, good sealing performance, long service life.

5、4, the valve sealing face by a convex ball, and the valve to seal foot line anastomosis.

6、5, stem open or close the trip is relatively short, and has a very reliable cutting action.

进口角式氨用截止阀技术参数：Technical parameters of imported angle type ammonia stop valve: