济南晨旭机器有限公司
主营：
主营：
所在地:
山东 济南
产品价格:
电议元/台(大量采购价格面议)
最小起订:
1
发布时间:
2019-05-24
有效期至:
2019-06-24
产品详细
设备特点 Equipment Features
◆该钻床主要用于铝合金门窗、幕墙型材的钻孔，特别适用于长料及大批量生产。
◆适用于截面不超过250mm×250mm的型材，加工长度非常大达到5000mm.
◆可安装多头钻座，满足多组群孔的同时加工。
◆进给系统采用气液阻尼缸，进给平稳。
◆采用施耐德控制系统，可实现任意机头的联动。
◆It is used for drilling holes of alumunum and curtain-wall profiles,Apply to volume-produce
◆Max processing profile section size is 250 ×250mm,max processing length is 5000mm
◆Multi-head boring anchor can be fixed to meet multi-holes processing requirement.
◆Feeding system adopts airdraulic-damping cylinder,which ensured smooth feeding.
◆Imported Schneider PLC control system with steady capability
主要规格及技术参数 Main Specification and Technical Parameter
|
电源电压 |
Voltage |
380V 50HZ |
|
功率 |
Cutting motor Power |
4×0.75kw |
|
非常大钻孔直径 |
Max drilling hole diameter |
13mm |
|
两钻孔非常大距离 |
Max distance between two drilling holes |
5000mm |
|
每组孔较小距离 |
Min distance between each group holes |
300mm |
|
动力头数量 |
Power unit quantity |
4 |
|
钻头前后移动非常大距离 |
Max moving distance at horizontal direction of drilling head |
120mm |
|
动力头上下移动距离 |
Moving distance at vertical direction |
150mm |
|
工作台尺寸 |
Worktable size |
300×300mm |
|
钻头进给行程 |
Drilling head feeding travel |
125mm |
|
进气压力 |
Feeding pressure |
0.5MPa-0.8MPa |
|
加工铝型材非常大截面尺寸 |
Max processing profile section size |
250×250mm |
|
外形尺寸 |
Contour Dimension |
6000mm×1000mm×1900mm |