BH-PS3812-12A输送式喷砂机

1、采用皮带（滚筒、履带）带动工件输送通过并进行喷砂的方式，可实现不间断喷砂作业。

1、 The belt (roller, crawler) is used to drive the workpiece to pass through and sandblasting can be carried out continuously.

2、 枪架采用摆动式喷砂，可使工件喷砂更均匀，枪架速度可依据实际要求调整。

2、The gun rack adopts swing sandblasting, which can make the workpiece sandblasting more uniform. The speed of the gun rack can be adjusted according to the actual requirements.

3、 采用先进的沙尘分离器，粉尘分离效果好，喷砂效率高

3、Advanced sand dust separator is adopted, with good dust separation effect and high sand blasting efficiency

4、 皮带（滚筒、履带）运行速度变频器可调，正反方向可调换，0.5-3M/min。

4、The frequency converter of belt (roller and track) running speed can be adjusted, and the positive and negative directions can be changed, 0.5-3M/min.

5、 采用PLC智能控制，除启动和急停外其他功能全部在触摸屏主页控制，控制界面为单一界面，工人能直观的进行操作，降低了本机对操作工人的使用要求。

6、 PLC intelligent control is adopted, and all other functions except startup and emergency stop are controlled on the touch screen home page. The control interface is a single interface, so that workers can operate intuitively, reducing the use requirements of the machine for operators.

适用范围：

适用于平板类，型材类工件的外表面喷砂处理，如：平面不锈钢板材，玻璃，石材，烤盘，电烫斗底板，装饰件，标牌徽章，铝型板材及其他平面工件等。

Scope of application:

It is suitable for sandblasting the outer surface of flat and profile workpieces, such as: flat stainless steel plate, glass, stone, baking tray, iron base plate, decorative parts, signs and badges, aluminum plate and other flat workpieces.