供应气动交流点焊机

<table style="background-color: #cccccc; height: 338px;" border="0" cellspacing="1" cellpadding="0" width="95%"> <tbody> <tr> <td style="line-height: 150%; background-color: #ffffff; padding: 5px;" height="30" valign="middle"> <div> <table border="0" cellspacing="6" cellpadding="0" width="高标准"> <tbody> <tr> <td> 直接式加压机构，应急性能好，焊接速度快<br />导向部采用磨擦力小的特殊材料，电磁气阀与气缸直接连接，加快动作反应速度，提高打点速度，并可减少空气流动的损耗。<br /> <br /> 任意调整加压速度<br />可任意调整加压头的下降速度，缓和了对被焊物加压时的冲击，也减少了噪音。 <br /> 安全、使用方便的高性能气路系统<br />过滤杯设有护罩，可防止杯子破损时的碎片飞溅，亦可保护从外部所受碰撞的冲击，杯子和护罩可装卸，检修容易。 <br /> 采用节水型强制冷却方式<br />采用循环式冷却水，避免水的浪费，大幅度减少冷却水量。 <br /> 高牢固强度的机体结构<br />具有抗冲击、振动的刚性，可防止加压时的电较头滑动，实现稳定焊接。 <br /> 上部绝缘，简单实用<br />二次导体采用上部绝缘方式，要避免铁屑的附着或下座安装焊接工装时易产生的绝缘部位的短路事故。 <br /> 主回路采用大功率SCR无触点开关<br />主回路采用水冷大功率可控硅元件，输出电源强劲、稳定，可靠性强。 <br />Direct press mechanism,good urgency performance and high welding speed<br />The guide uses special material with low fuction.<br />Electromagnetic air value is directly connected with air cylinder to quicken reaction.<br />Adjustable pressing speeds<br />Down speed of the press head can be adjusted as necessary,thus to relieve pressing shock and reduce noise.<br />Safe,easy-to-use and high-performance airline system<br />Filter cup is equipped with protection cover,which can prevent scrap can be when cup breaks and can protect filter cup from external shock,The cup and cover are removable and maintenance canbe performed easily.<br />Water-saving type forced cooling system<br />Cycle cooling water system can avoid waste of water,thus largely reduce required amount of cooling water.<br />High-strength body structure<br />It has the rigidity enough to withstand shocks and vibrations,prevent electrode slide and stabilize welding process.<br />Upper insulation, simple to use<br />The secondary conductor uses upper insulation arrangement,this can avoid short circuits all the insulation portion when the lower base is mounted with welding tooling.<br />Main circuit uses large-power SCR contactless switch <br />Main circuit uses water-cooled large power sili controlled rectifying element,the power output is powerful,stable and reliable. <table border="1" cellspacing="0" cellpadding="0" width="高标准"> <tbody> <tr> <td colspan="3" height="20" align="center"><strong>项目(单位) \ 型号  </strong></td> <td align="center"><strong>DN-16 </strong></td> <td align="center"><strong>DN-25</strong> </td> <td align="center"><strong> D(T)N-40</strong></td> </tr> <tr> <td colspan="2" height="20" align="center">额定容量</td> <td height="20" align="center">KVA</td> <td align="center">16 </td> <td align="center">25 </td> <td align="center">40 </td> </tr> <tr> <td colspan="2" height="20" align="center">额定初级电压</td> <td height="20" align="center">V</td> <td align="center">380</td> <td align="center">380 </td> <td align="center">380 </td> </tr> <tr> <td colspan="2" height="20" align="center">额定频率</td> <td height="20" align="center">Hz</td> <td align="center">50/60</td> <td align="center">50/60</td> <td align="center">50/60 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大短路电流</td> <td height="20" align="center">A</td> <td align="center">10500</td> <td align="center">13500 </td> <td align="center">17500 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大焊接输入</td> <td height="20" align="center">KVA</td> <td align="center">30 </td> <td align="center">45 </td> <td align="center">73 </td> </tr> <tr> <td colspan="2" height="20" align="center">负载持续率</td> <td height="20" align="center">%</td> <td align="center">50</td> <td align="center">50 </td> <td align="center">50 </td> </tr> <tr> <td colspan="2" height="20" align="center">臂伸尺寸</td> <td height="20" align="center">mm</td> <td align="center">220X500</td> <td align="center">220X500 </td> <td align="center">220X500 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大加压力</td> <td height="20" align="center">N</td> <td align="center">3900</td> <td align="center">3900 </td> <td align="center">6000 </td> </tr> <tr> <td colspan="2" height="20" align="center">电较行程</td> <td height="20" align="center">mm</td> <td align="center">60</td> <td align="center">60 </td> <td align="center">60 </td> </tr> <tr> <td colspan="2" height="20" align="center">冷却水量</td> <td height="20" align="center">L/min</td> <td align="center">3 </td> <td align="center">3 </td> <td align="center">4 </td> </tr> <tr> <td colspan="2" height="20" align="center">重量</td> <td height="20" align="center">kg</td> <td align="center">200</td> <td align="center">220 </td> <td align="center">280 </td> </tr> <tr> <td rowspan="4" height="20" align="center">电较尺寸</td> <td height="20" align="center">电较头</td> <td height="20" align="center">mm</td> <td align="center">φ13</td> <td align="center">φ13</td> <td align="center">φ16 </td> </tr> <tr> <td height="20" align="center">电较握杆</td> <td height="20" align="center">mm</td> <td align="center">φ20X180</td> <td align="center">φ20X181 </td> <td align="center">φ25X190 </td> </tr> <tr> <td height="20" align="center">电较臂</td> <td height="20" align="center">mm</td> <td align="center">φ50X150</td> <td align="center">φ50X150 </td> <td align="center">φ60X200 </td> </tr> <tr> <td height="20" align="center">凸焊台</td> <td height="20" align="center">mm</td> <td align="center"> </td> <td align="center">  </td> <td align="center">110X130 </td> </tr> <tr> <td height="20" align="center">焊接能力</td> <td height="20" align="center">低碳钢二块叠焊</td> <td height="20" align="center">mm</td> <td align="center">2.0+2.0</td> <td align="center">2.5+2.5</td> <td align="center">3.0+3.0 </td> </tr> </tbody> </table>    </td> </tr> <tr> <td colspan="2"> <div> <hr size="2" /> </div> </td> </tr> <tr> <td colspan="2">  <div> <table border="1" cellspacing="0" cellpadding="0" width="高标准"> <tbody> <tr> <td colspan="3" height="20" align="center"><strong>项目(单位) \ 型号 </strong></td> <td align="center"><strong>D(T)N-63 </strong></td> <td align="center"><strong>D(T)N-80A </strong></td> <td align="center"><strong> D(T)N-80B</strong></td> <td align="center"><strong> D(T)N-100A</strong></td> </tr> <tr> <td colspan="2" height="20" align="center">额定容量</td> <td height="20" align="center">KVA</td> <td align="center">63 </td> <td align="center">80 </td> <td align="center">80 </td> <td align="center">100 </td> </tr> <tr> <td colspan="2" height="20" align="center">额定初级电压</td> <td height="20" align="center">V</td> <td align="center">380</td> <td align="center">380 </td> <td align="center">380 </td> <td align="center">380 </td> </tr> <tr> <td colspan="2" height="20" align="center">额定频率</td> <td height="20" align="center">Hz</td> <td align="center">50/60</td> <td align="center">50/60</td> <td align="center">50/60 </td> <td align="center">50/60 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大短路电流</td> <td height="20" align="center">A</td> <td align="center">22000</td> <td align="center">27000 </td> <td align="center">28000 </td> <td align="center">31500 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大焊接输入</td> <td height="20" align="center">KVA</td> <td align="center">122 </td> <td align="center">166 </td> <td align="center">173 </td> <td align="center">222 </td> </tr> <tr> <td colspan="2" height="20" align="center">负载持续率</td> <td height="20" align="center">%</td> <td align="center">50</td> <td align="center">50 </td> <td align="center">50 </td> <td align="center">50 </td> </tr> <tr> <td colspan="2" height="20" align="center">臂伸尺寸</td> <td height="20" align="center">mm</td> <td align="center">220X500</td> <td align="center">220X450 </td> <td align="center">250X400 </td> <td align="center">220X450 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大加压力</td> <td height="20" align="center">N</td> <td align="center">6000</td> <td align="center">6000 </td> <td align="center">10000 </td> <td align="center">6000 </td> </tr> <tr> <td colspan="2" height="20" align="center">电较行程</td> <td height="20" align="center">mm</td> <td align="center">60</td> <td align="center">60 </td> <td align="center">80 </td> <td align="center">60 </td> </tr> <tr> <td colspan="2" height="20" align="center">冷却水量</td> <td height="20" align="center">L/min</td> <td align="center">4 </td> <td align="center">8 </td> <td align="center">8 </td> <td align="center">8 </td> </tr> <tr> <td colspan="2" height="20" align="center">重量</td> <td height="20" align="center">kg</td> <td align="center">340</td> <td align="center">380 </td> <td align="center">460 </td> <td align="center">400 </td> </tr> <tr> <td rowspan="4" height="20" align="center">电较尺寸</td> <td height="20" align="center">电较头</td> <td height="20" align="center">mm</td> <td align="center">φ16</td> <td align="center">φ16</td> <td align="center">φ20 </td> <td align="center">φ16 </td> </tr> <tr> <td height="20" align="center">电较握杆</td> <td height="20" align="center">mm</td> <td align="center">φ25X190</td> <td align="center">φ25X190 </td> <td align="center">φ32X200 </td> <td align="center">φ25X190 </td> </tr> <tr> <td height="20" align="center">电较臂</td> <td height="20" align="center">mm</td> <td align="center">φ60X200</td> <td align="center">φ60X200 </td> <td align="center">φ80X200 </td> <td align="center">φ60X200 </td> </tr> <tr> <td height="20" align="center">凸焊台</td> <td height="20" align="center">mm</td> <td align="center">110X130 </td> <td align="center">120X130  </td> <td align="center">150X160 </td> <td align="center">120X130 </td> </tr> <tr> <td height="20" align="center">焊接能力</td> <td height="20" align="center">低碳钢二块叠焊</td> <td height="20" align="center">mm</td> <td align="center">3.5+3.5</td> <td align="center">4.0+4.0</td> <td align="center">4.0+4.0 </td> <td align="center">4.5+4.5 </td> </tr> </tbody> </table> </div> <div><br /> <table border="1" cellspacing="0" cellpadding="0" width="高标准"> <tbody> <tr> <td colspan="3" height="20" align="center"><strong>项目(单位) \ 型号 </strong></td> <td height="20" align="center"><strong>D(T)N-100B </strong></td> <td height="20" align="center"><strong>D(T)N-150A </strong></td> <td height="20" align="center"><strong> D(T)N-150B</strong></td> <td height="20" align="center"><strong> D(T)N-200A</strong></td> <td height="20" align="center"><strong> D(T)N-200B</strong></td> </tr> <tr> <td colspan="2" height="20" align="center">额定容量</td> <td height="20" align="center">KVA</td> <td height="20" align="center">100 </td> <td height="20" align="center">150 </td> <td height="20" align="center">150 </td> <td height="20" align="center">200 </td> <td height="20" align="center">200 </td> </tr> <tr> <td colspan="2" height="20" align="center">额定初级电压</td> <td height="20" align="center">V</td> <td height="20" align="center">380</td> <td height="20" align="center">380 </td> <td height="20" align="center">380 </td> <td height="20" align="center">380 </td> <td height="20" align="center">380 </td> </tr> <tr> <td colspan="2" height="20" align="center">额定频率</td> <td height="20" align="center">Hz</td> <td height="20" align="center">50/60</td> <td height="20" align="center">50/60</td> <td height="20" align="center">50/60 </td> <td height="20" align="center">50/60 </td> <td height="20" align="center">50/60 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大短路电流</td> <td height="20" align="center">A</td> <td height="20" align="center">33000</td> <td height="20" align="center">37000 </td> <td height="20" align="center">37000 </td> <td height="20" align="center">42000 </td> <td height="20" align="center">42000 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大焊接输入</td> <td height="20" align="center">KVA</td> <td height="20" align="center">232 </td> <td height="20" align="center">296 </td> <td height="20" align="center">296 </td> <td height="20" align="center">386 </td> <td height="20" align="center">386 </td> </tr> <tr> <td colspan="2" height="20" align="center">负载持续率</td> <td height="20" align="center">%</td> <td height="20" align="center">50</td> <td height="20" align="center">50 </td> <td height="20" align="center">50 </td> <td height="20" align="center">50 </td> <td height="20" align="center">50 </td> </tr> <tr> <td colspan="2" height="20" align="center">臂伸尺寸</td> <td height="20" align="center">mm</td> <td height="20" align="center">250X400</td> <td height="20" align="center">250X400 </td> <td height="20" align="center">300X400 </td> <td height="20" align="center">220X400 </td> <td height="20" align="center">300X450 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大加压力</td> <td height="20" align="center">N</td> <td height="20" align="center">10000</td> <td height="20" align="center">10000 </td> <td height="20" align="center">15000 </td> <td height="20" align="center">10000 </td> <td height="20" align="center">15000 </td> </tr> <tr> <td colspan="2" height="20" align="center">电较行程</td> <td height="20" align="center">mm</td> <td height="20" align="center">80</td> <td height="20" align="center">80 </td> <td height="20" align="center">100 </td> <td height="20" align="center">80 </td> <td height="20" align="center">100 </td> </tr> <tr> <td colspan="2" height="20" align="center">冷却水量</td> <td height="20" align="center">L/min</td> <td height="20" align="center">8 </td> <td height="20" align="center">10 </td> <td height="20" align="center">10 </td> <td height="20" align="center">12 </td> <td height="20" align="center">12 </td> </tr> <tr> <td colspan="2" height="20" align="center">重量</td> <td height="20" align="center">kg</td> <td height="20" align="center">480</td> <td height="20" align="center">600 </td> <td height="20" align="center">680 </td> <td height="20" align="center">700 </td> <td height="20" align="center">800 </td> </tr> <tr> <td rowspan="4" height="20" align="center">电较尺寸</td> <td height="20" align="center">电较头</td> <td height="20" align="center">mm</td> <td height="20" align="center">φ20</td> <td height="20" align="center">φ20</td> <td height="20" align="center">φ25 </td> <td height="20" align="center">φ20 </td> <td height="20" align="center">φ25 </td> </tr> <tr> <td height="20" align="center">电较握杆</td> <td height="20" align="center">mm</td> <td height="20" align="center">φ32X190</td> <td height="20" align="center">φ32X200 </td> <td height="20" align="center">φ40X300 </td> <td height="20" align="center">φ32X200 </td> <td height="20" align="center">φ40X200 </td> </tr> <tr> <td height="20" align="center">电较臂</td> <td height="20" align="center">mm</td> <td height="20" align="center">φ80X200</td> <td height="20" align="center">φ80X240 </td> <td height="20" align="center">φ100X300 </td> <td height="20" align="center">φ80X240 </td> <td height="20" align="center">φ100X240 </td> </tr> <tr> <td height="20" align="center">凸焊台</td> <td height="20" align="center">mm</td> <td height="20" align="center">150X160 </td> <td height="20" align="center">150X160  </td> <td height="20" align="center">180X190 </td> <td height="20" align="center">150X160 </td> <td height="20" align="center">180X190 </td> </tr> <tr> <td height="20" align="center">焊接能力</td> <td height="20" align="center">低碳钢二块叠焊</td> <td height="20" align="center">mm</td> <td height="20" align="center">4.5+4.5</td> <td height="20" align="center">5.0+5.0</td> <td height="20" align="center">5.0+5.0 </td> <td height="20" align="center">6.0+6.0 </td> <td height="20" align="center">6.0+6.0 </td> </tr> </tbody> </table> </div> </td> </tr> </tbody> </table> </div> </td> </tr> <tr> <td style="background-color: #ffffff;" height="30" align="right" valign="middle"><a href="javascript:window.close()"></a> <table style="background-color: #cccccc; height: 338px;" border="0" cellspacing="1" cellpadding="0" width="95%"> <tbody> <tr> <td style="line-height: 150%; background-color: #ffffff; padding: 5px;" height="30" valign="middle"> <div> <table border="0" cellspacing="6" cellpadding="0" width="高标准"> <tbody> <tr> <td> 直接式加压机构，应急性能好，焊接速度快<br />导向部采用磨擦力小的特殊材料，电磁气阀与气缸直接连接，加快动作反应速度，提高打点速度，并可减少空气流动的损耗。<br /> <br /> 任意调整加压速度<br />可任意调整加压头的下降速度，缓和了对被焊物加压时的冲击，也减少了噪音。 <br /> 安全、使用方便的高性能气路系统<br />过滤杯设有护罩，可防止杯子破损时的碎片飞溅，亦可保护从外部所受碰撞的冲击，杯子和护罩可装卸，检修容易。 <br /> 采用节水型强制冷却方式<br />采用循环式冷却水，避免水的浪费，大幅度减少冷却水量。 <br /> 高牢固强度的机体结构<br />具有抗冲击、振动的刚性，可防止加压时的电较头滑动，实现稳定焊接。 <br /> 上部绝缘，简单实用<br />二次导体采用上部绝缘方式，要避免铁屑的附着或下座安装焊接工装时易产生的绝缘部位的短路事故。 <br /> 主回路采用大功率SCR无触点开关<br />主回路采用水冷大功率可控硅元件，输出电源强劲、稳定，可靠性强。 <br />Direct press mechanism,good urgency performance and high welding speed<br />The guide uses special material with low fuction.<br />Electromagnetic air value is directly connected with air cylinder to quicken reaction.<br />Adjustable pressing speeds<br />Down speed of the press head can be adjusted as necessary,thus to relieve pressing shock and reduce noise.<br />Safe,easy-to-use and high-performance airline system<br />Filter cup is equipped with protection cover,which can prevent scrap can be when cup breaks and can protect filter cup from external shock,The cup and cover are removable and maintenance canbe performed easily.<br />Water-saving type forced cooling system<br />Cycle cooling water system can avoid waste of water,thus largely reduce required amount of cooling water.<br />High-strength body structure<br />It has the rigidity enough to withstand shocks and vibrations,prevent electrode slide and stabilize welding process.<br />Upper insulation, simple to use<br />The secondary conductor uses upper insulation arrangement,this can avoid short circuits all the insulation portion when the lower base is mounted with welding tooling.<br />Main circuit uses large-power SCR contactless switch <br />Main circuit uses water-cooled large power sili controlled rectifying element,the power output is powerful,stable and reliable. <table border="1" cellspacing="0" cellpadding="0" width="高标准"> <tbody> <tr> <td colspan="3" height="20" align="center"><strong>项目(单位) \ 型号  </strong></td> <td align="center"><strong>DN-16 </strong></td> <td align="center"><strong>DN-25</strong> </td> <td align="center"><strong> D(T)N-40</strong></td> </tr> <tr> <td colspan="2" height="20" align="center">额定容量</td> <td height="20" align="center">KVA</td> <td align="center">16 </td> <td align="center">25 </td> <td align="center">40 </td> </tr> <tr> <td colspan="2" height="20" align="center">额定初级电压</td> <td height="20" align="center">V</td> <td align="center">380</td> <td align="center">380 </td> <td align="center">380 </td> </tr> <tr> <td colspan="2" height="20" align="center">额定频率</td> <td height="20" align="center">Hz</td> <td align="center">50/60</td> <td align="center">50/60</td> <td align="center">50/60 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大短路电流</td> <td height="20" align="center">A</td> <td align="center">10500</td> <td align="center">13500 </td> <td align="center">17500 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大焊接输入</td> <td height="20" align="center">KVA</td> <td align="center">30 </td> <td align="center">45 </td> <td align="center">73 </td> </tr> <tr> <td colspan="2" height="20" align="center">负载持续率</td> <td height="20" align="center">%</td> <td align="center">50</td> <td align="center">50 </td> <td align="center">50 </td> </tr> <tr> <td colspan="2" height="20" align="center">臂伸尺寸</td> <td height="20" align="center">mm</td> <td align="center">220X500</td> <td align="center">220X500 </td> <td align="center">220X500 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大加压力</td> <td height="20" align="center">N</td> <td align="center">3900</td> <td align="center">3900 </td> <td align="center">6000 </td> </tr> <tr> <td colspan="2" height="20" align="center">电较行程</td> <td height="20" align="center">mm</td> <td align="center">60</td> <td align="center">60 </td> <td align="center">60 </td> </tr> <tr> <td colspan="2" height="20" align="center">冷却水量</td> <td height="20" align="center">L/min</td> <td align="center">3 </td> <td align="center">3 </td> <td align="center">4 </td> </tr> <tr> <td colspan="2" height="20" align="center">重量</td> <td height="20" align="center">kg</td> <td align="center">200</td> <td align="center">220 </td> <td align="center">280 </td> </tr> <tr> <td rowspan="4" height="20" align="center">电较尺寸</td> <td height="20" align="center">电较头</td> <td height="20" align="center">mm</td> <td align="center">φ13</td> <td align="center">φ13</td> <td align="center">φ16 </td> </tr> <tr> <td height="20" align="center">电较握杆</td> <td height="20" align="center">mm</td> <td align="center">φ20X180</td> <td align="center">φ20X181 </td> <td align="center">φ25X190 </td> </tr> <tr> <td height="20" align="center">电较臂</td> <td height="20" align="center">mm</td> <td align="center">φ50X150</td> <td align="center">φ50X150 </td> <td align="center">φ60X200 </td> </tr> <tr> <td height="20" align="center">凸焊台</td> <td height="20" align="center">mm</td> <td align="center"> </td> <td align="center">  </td> <td align="center">110X130 </td> </tr> <tr> <td height="20" align="center">焊接能力</td> <td height="20" align="center">低碳钢二块叠焊</td> <td height="20" align="center">mm</td> <td align="center">2.0+2.0</td> <td align="center">2.5+2.5</td> <td align="center">3.0+3.0 </td> </tr> </tbody> </table>    </td> </tr> <tr> <td colspan="2"> <div> <hr size="2" /> </div> </td> </tr> <tr> <td colspan="2">  <div> <table border="1" cellspacing="0" cellpadding="0" width="高标准"> <tbody> <tr> <td colspan="3" height="20" align="center"><strong>项目(单位) \ 型号 </strong></td> <td align="center"><strong>D(T)N-63 </strong></td> <td align="center"><strong>D(T)N-80A </strong></td> <td align="center"><strong> D(T)N-80B</strong></td> <td align="center"><strong> D(T)N-100A</strong></td> </tr> <tr> <td colspan="2" height="20" align="center">额定容量</td> <td height="20" align="center">KVA</td> <td align="center">63 </td> <td align="center">80 </td> <td align="center">80 </td> <td align="center">100 </td> </tr> <tr> <td colspan="2" height="20" align="center">额定初级电压</td> <td height="20" align="center">V</td> <td align="center">380</td> <td align="center">380 </td> <td align="center">380 </td> <td align="center">380 </td> </tr> <tr> <td colspan="2" height="20" align="center">额定频率</td> <td height="20" align="center">Hz</td> <td align="center">50/60</td> <td align="center">50/60</td> <td align="center">50/60 </td> <td align="center">50/60 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大短路电流</td> <td height="20" align="center">A</td> <td align="center">22000</td> <td align="center">27000 </td> <td align="center">28000 </td> <td align="center">31500 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大焊接输入</td> <td height="20" align="center">KVA</td> <td align="center">122 </td> <td align="center">166 </td> <td align="center">173 </td> <td align="center">222 </td> </tr> <tr> <td colspan="2" height="20" align="center">负载持续率</td> <td height="20" align="center">%</td> <td align="center">50</td> <td align="center">50 </td> <td align="center">50 </td> <td align="center">50 </td> </tr> <tr> <td colspan="2" height="20" align="center">臂伸尺寸</td> <td height="20" align="center">mm</td> <td align="center">220X500</td> <td align="center">220X450 </td> <td align="center">250X400 </td> <td align="center">220X450 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大加压力</td> <td height="20" align="center">N</td> <td align="center">6000</td> <td align="center">6000 </td> <td align="center">10000 </td> <td align="center">6000 </td> </tr> <tr> <td colspan="2" height="20" align="center">电较行程</td> <td height="20" align="center">mm</td> <td align="center">60</td> <td align="center">60 </td> <td align="center">80 </td> <td align="center">60 </td> </tr> <tr> <td colspan="2" height="20" align="center">冷却水量</td> <td height="20" align="center">L/min</td> <td align="center">4 </td> <td align="center">8 </td> <td align="center">8 </td> <td align="center">8 </td> </tr> <tr> <td colspan="2" height="20" align="center">重量</td> <td height="20" align="center">kg</td> <td align="center">340</td> <td align="center">380 </td> <td align="center">460 </td> <td align="center">400 </td> </tr> <tr> <td rowspan="4" height="20" align="center">电较尺寸</td> <td height="20" align="center">电较头</td> <td height="20" align="center">mm</td> <td align="center">φ16</td> <td align="center">φ16</td> <td align="center">φ20 </td> <td align="center">φ16 </td> </tr> <tr> <td height="20" align="center">电较握杆</td> <td height="20" align="center">mm</td> <td align="center">φ25X190</td> <td align="center">φ25X190 </td> <td align="center">φ32X200 </td> <td align="center">φ25X190 </td> </tr> <tr> <td height="20" align="center">电较臂</td> <td height="20" align="center">mm</td> <td align="center">φ60X200</td> <td align="center">φ60X200 </td> <td align="center">φ80X200 </td> <td align="center">φ60X200 </td> </tr> <tr> <td height="20" align="center">凸焊台</td> <td height="20" align="center">mm</td> <td align="center">110X130 </td> <td align="center">120X130  </td> <td align="center">150X160 </td> <td align="center">120X130 </td> </tr> <tr> <td height="20" align="center">焊接能力</td> <td height="20" align="center">低碳钢二块叠焊</td> <td height="20" align="center">mm</td> <td align="center">3.5+3.5</td> <td align="center">4.0+4.0</td> <td align="center">4.0+4.0 </td> <td align="center">4.5+4.5 </td> </tr> </tbody> </table> </div> <div><br /> <table border="1" cellspacing="0" cellpadding="0" width="高标准"> <tbody> <tr> <td colspan="3" height="20" align="center"><strong>项目(单位) \ 型号 </strong></td> <td height="20" align="center"><strong>D(T)N-100B </strong></td> <td height="20" align="center"><strong>D(T)N-150A </strong></td> <td height="20" align="center"><strong> D(T)N-150B</strong></td> <td height="20" align="center"><strong> D(T)N-200A</strong></td> <td height="20" align="center"><strong> D(T)N-200B</strong></td> </tr> <tr> <td colspan="2" height="20" align="center">额定容量</td> <td height="20" align="center">KVA</td> <td height="20" align="center">100 </td> <td height="20" align="center">150 </td> <td height="20" align="center">150 </td> <td height="20" align="center">200 </td> <td height="20" align="center">200 </td> </tr> <tr> <td colspan="2" height="20" align="center">额定初级电压</td> <td height="20" align="center">V</td> <td height="20" align="center">380</td> <td height="20" align="center">380 </td> <td height="20" align="center">380 </td> <td height="20" align="center">380 </td> <td height="20" align="center">380 </td> </tr> <tr> <td colspan="2" height="20" align="center">额定频率</td> <td height="20" align="center">Hz</td> <td height="20" align="center">50/60</td> <td height="20" align="center">50/60</td> <td height="20" align="center">50/60 </td> <td height="20" align="center">50/60 </td> <td height="20" align="center">50/60 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大短路电流</td> <td height="20" align="center">A</td> <td height="20" align="center">33000</td> <td height="20" align="center">37000 </td> <td height="20" align="center">37000 </td> <td height="20" align="center">42000 </td> <td height="20" align="center">42000 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大焊接输入</td> <td height="20" align="center">KVA</td> <td height="20" align="center">232 </td> <td height="20" align="center">296 </td> <td height="20" align="center">296 </td> <td height="20" align="center">386 </td> <td height="20" align="center">386 </td> </tr> <tr> <td colspan="2" height="20" align="center">负载持续率</td> <td height="20" align="center">%</td> <td height="20" align="center">50</td> <td height="20" align="center">50 </td> <td height="20" align="center">50 </td> <td height="20" align="center">50 </td> <td height="20" align="center">50 </td> </tr> <tr> <td colspan="2" height="20" align="center">臂伸尺寸</td> <td height="20" align="center">mm</td> <td height="20" align="center">250X400</td> <td height="20" align="center">250X400 </td> <td height="20" align="center">300X400 </td> <td height="20" align="center">220X400 </td> <td height="20" align="center">300X450 </td> </tr> <tr> <td colspan="2" height="20" align="center">非常大加压力</td> <td height="20" align="center">N</td> <td height="20" align="center">10000</td> <td height="20" align="center">10000 </td> <td height="20" align="center">15000 </td> <td height="20" align="center">10000 </td> <td height="20" align="center">15000 </td> </tr> <tr> <td colspan="2" height="20" align="center">电较行程</td> <td height="20" align="center">mm</td> <td height="20" align="center">80</td> <td height="20" align="center">80 </td> <td height="20" align="center">100 </td> <td height="20" align="center">80 </td> <td height="20" align="center">100 </td> </tr> <tr> <td colspan="2" height="20" align="center">冷却水量</td> <td height="20" align="center">L/min</td> <td height="20" align="center">8 </td> <td height="20" align="center">10 </td> <td height="20" align="center">10 </td> <td height="20" align="center">12 </td> <td height="20" align="center">12 </td> </tr> <tr> <td colspan="2" height="20" align="center">重量</td> <td height="20" align="center">kg</td> <td height="20" align="center">480</td> <td height="20" align="center">600 </td> <td height="20" align="center">680 </td> <td height="20" align="center">700 </td> <td height="20" align="center">800 </td> </tr> <tr> <td rowspan="4" height="20" align="center">电较尺寸</td> <td height="20" align="center">电较头</td> <td height="20" align="center">mm</td> <td height="20" align="center">φ20</td> <td height="20" align="center">φ20</td> <td height="20" align="center">φ25 </td> <td height="20" align="center">φ20 </td> <td height="20" align="center">φ25 </td> </tr> <tr> <td height="20" align="center">电较握杆</td> <td height="20" align="center">mm</td> <td height="20" align="center">φ32X190</td> <td height="20" align="center">φ32X200 </td> <td height="20" align="center">φ40X300 </td> <td height="20" align="center">φ32X200 </td> <td height="20" align="center">φ40X200 </td> </tr> <tr> <td height="20" align="center">电较臂</td> <td height="20" align="center">mm</td> <td height="20" align="center">φ80X200</td> <td height="20" align="center">φ80X240 </td> <td height="20" align="center">φ100X300 </td> <td height="20" align="center">φ80X240 </td> <td height="20" align="center">φ100X240 </td> </tr> <tr> <td height="20" align="center">凸焊台</td> <td height="20" align="center">mm</td> <td height="20" align="center">150X160 </td> <td height="20" align="center">150X160  </td> <td height="20" align="center">180X190 </td> <td height="20" align="center">150X160 </td> <td height="20" align="center">180X190 </td> </tr> <tr> <td height="20" align="center">焊接能力</td> <td height="20" align="center">低碳钢二块叠焊</td> <td height="20" align="center">mm</td> <td height="20" align="center">4.5+4.5</td> <td height="20" align="center">5.0+5.0</td> <td height="20" align="center">5.0+5.0 </td> <td height="20" align="center">6.0+6.0 </td> <td height="20" align="center">6.0+6.0 </td> </tr> </tbody> </table> </div> </td> </tr> </tbody> </table> </div> </td> </tr> <tr> <td style="background-color: #ffffff;" height="30" align="right" valign="middle"><a href="javascript:window.close()"></a></td> </tr> </tbody> </table> </td> </tr> </tbody> </table>