主营:铝型材贴膜机,铝塑木门包装机,铝型材缠包机,打包机封囗机,木纹炉,佛山铝型材包装机,佛山铝型材收缩机,佛山热收缩包装机
所在地:
广东 佛山 南海区
产品价格:
面议/台(大量采购价格面议)
最小起订:
1
发布时间:
2026-09-11
有效期至:
2026-10-11
产品详细
1. Work Principle 工作原理
This equipment adopts bag-suction vacuum wood grain transfer, which can achieve realistic wood grain, marble and other surface effects on the transferred products. It is mainly applicable to the thermal transfer of metal surfaces treated by spraying, baking paint, electrophoresis, etc. | 本设备采用抽袋抽真空木纹转印,在转印后的产品表面有非常逼真的木纹、大理石等处理效果。其产品主要适用于经喷涂、烤漆、电泳等处理后的金属表面的热转印。
2. Equipment Composition 设备组成
2.1 Core Components 核心部件
(1) Furnace Body 炉体:
(2) Heating and Temperature Cool System 加热温控系统:
(3) Vacuum Adsorption Device 真空吸附装置
(4) Backblowing Film Device 反吹膜装置
(5) Vacuum Auxiliary Frame 抽真空辅架
2.2 Main Configuration 主要组成
(1) 1 set of Thermosetting Transfer Furnace (including burner and heat circulation system) | 1、热固化转印炉(含燃烧机及热循环系统)1套
(2) 2 sets of Vacuum Suction and Driving Device | 2、抽真空及驱动装置 2套
(3) 2 sets of Single-Piece Transfer Trolley | 3、抽单支转印小车 2套
(4) 1 set of Full-Automatic Electrical Cool System | 4、全自动电控系统 1套
3. Main Technical Parameters 主要元件技术参数
|
Parameter Name 参数名称 |
Specification 规格 |
|
Length of Transfer Aluminum Profile 转印铝型材长度 |
6300mm (1st layer), 6800mm (2nd layer), 7300mm (3rd layer, vacuum nozzle from bottom to top) | 真空吸嘴从下往上数较好层6300mm铝材,第二层6800mm铝材,第三层7300mm铝材 |
|
Maximum Cross-Section Size of Profile 型材额定截面尺寸 |
100mm (width) × 160mm (height) | 宽100mm×高160mm |
|
Output 产量 |
About 4-8 furnaces/hour, 3-5 tons/hour | 约4-8炉/每小时,3-5吨/小时 |


