厂家直销压铸模温机导热油电加热油炉

The mould temperature machine consists of media box, heating cooling system, power transmission system, liquid level control system and temperature sensor, injection port and so on. Normally, the pump to make hot fluid in the power transmission system from medium box has a built-in heater and cooler to mould, again from the mold back to medium tank; The temperature sensor measures the temperature of the hot fluid and transfers the data to the controller part of the control. The controller regulates the temperature of the hot fluid, which indirectly adjusts the temperature of the mold. If in production mold temperature machine, mould temperature more than set value of the controller, the controller will open the solenoid valve connected to feed line, until the temperature of the heat transfer fluid, namely the temperature of the mold back to the set value. If the die temperature is below the set point, the controller will turn on the heater.

苏州迈浦特O系列高温模温机特点：

1、运油式模温机较高使用温度320℃

2、自动开机排气

3、自动冷却关机

4、出油、回油温度显示

5、模具回水功能

6、微电脑触摸式控制操作简单

7、OMRON、FUJI、TE控制零件

8、不锈钢管路，减少管阻及锈垢

9、故障显示，维修不用专业人员

安全保护装置

1、温度异常 循环油温度超过上限值切断主电源

2、电源逆相 电源相位检测防止泵浦反转并启动紧急信号指示

3、泵浦过载 热继电器保护泵浦过载并启动紧急信号指示

4、缺油保护 油槽根据液位开关检测油位防止缺油并启动紧急信号指示

5、异常加热 接触器卡死异常加热启动紧急信号并指示

6、管道堵塞 BY-PASS泄压回路保护泵浦

7、压力异常 系统压力异常自动停止加热动作

8、排气功能 设备运行120度时，自动停加热计时排气功能

9、短路-超温 空气开关-脱扣

基本参数如下表：