白色金刚砂60#80#120#用于奥氏体不锈钢喷砂

电熔氧化铝即白色金刚砂60#80#120#用于奥氏体不锈钢喷砂

 

喷砂用白刚玉砂选用充分冶炼结晶的白刚玉固定炉料，经过破碎、筛分等工艺生产而来。喷砂用白刚玉的粒径范围经过严格控制，使磨粒大小控制在一定范围内。喷砂后产生表面一致的粗糙度。白刚玉韧性好，研磨能力强，自锐性好，喷射到喷砂工件表面时，通过气流的冲击力，工件撞击出凹痕。钝化后的喷砂表面有利于后续喷漆的油漆保持把持力。白刚玉喷砂磨粒还具有喷砂效率高，利用率高的优点。

 The white fused aluminum oxide used for sandblasting is produced by using fully melted and crystallized white corundum as fixed furnace material, and is processed through processes such as crushing and screening. The particle size range of white corundum used for sandblasting is strictly controlled to keep the abrasive particle size within a certain range. After sandblasting, a consistent surface roughness is produced. White corundum has good toughness, strong grinding ability, and good self sharpening. When sprayed onto the surface of sandblasted workpieces, the impact force of the airflow causes the workpieces to produce dents. The sandblasted surface after passivation is beneficial for maintaining the grip of subsequent paint spraying. White corundum sandblasting abrasive particles also have the advantages of high sandblasting efficiency and high utilization rate.

白刚玉的特性：

1.    白刚玉显微硬度20.58Gpa,维氏硬度2200-2400kg/mm2，莫氏硬度9.0。可喷砂于大部分金属、铸钢件、铸铁件、有色金属合金材料、含铬含锰含钨钼金属、玻璃和其他非金属材料。

2.    白刚玉研磨能力强，喷砂效率高，由于具有很强的自锐性 ，不会对喷砂表面造成烧*氧化。

3.    白钢玉还可以直接用于研磨抛光，表面处理，喷砂除锈等领域，可用于干式和湿式喷砂，表面抛毛抛光，喷涂前表面处理钝化等领域。

4.    白钢玉氧化铝的纯度高，主要晶相时α相的氧化铝。杂质少，磁性物含量低，喷砂后不会产生化学残留，可用于医药、航空、食品领域机械部件的喷砂。

 

 Feature：

1. The microhardness of white corundum is 20.58Gpa, the Vickers hardness is 2200-2400kg/mm2, and the Mohs hardness is 9.0. It can be sandblasted on most metals, steel castings, cast iron, non-ferrous alloy materials, chromium, manganese, tungsten and molybdenum metals, glass, and other non-metallic materials.

2. White corundum has strong grinding ability and high sandblasting efficiency. Due to its strong self sharpening property, it will not cause burning and oxidation on the sandblasted surface.

3. White steel jade can also be directly used in fields such as grinding and polishing, surface treatment, sandblasting and rust removal. It can be used in dry and wet sandblasting, surface roughening and polishing, and surface treatment passivation before spraying.

 

4. The purity of white steel jade alumina is high, and the main crystal phase is α Phase alumina. With low impurities and low magnetic content, sandblasting does not produce chemical residues and can be used for sandblasting mechanical components in the fields of medicine, aviation, and food.

 

物理指标：

颜色	白色
硬度	莫氏9.0
使用温度	1900 ℃
熔点	2250 ℃
比重	3.95g/cm3
体积密度	3.6g/cm3
堆积密度	1.55-1.95 g/cm3
晶形	多棱角

 

 

化学成分：

	白刚玉粒度砂 F8-F220	白刚玉微粉 F230-F2000
AL2O3	99.53%	99.27%
SiO2	0.06%	0.14%
NA2O	0.23%	0.28%
Fe2O3	0.07%	0.06%
CaO	0.03%	0.05%

 

喷砂白钢玉的可选型号:

粒度牌号	平均粒径（mm）	基本粒尺寸（mm）
8#	2.460	2.000-2.360
10#	2.085	1.700-2.000
12#	1.765	1.400-1.700
14#	1.470	1.180-1.400
16#	1.230	1.100-1.180
20#	1.040	0.850-1.000
22#	0.885	0.710-0.850
24#	0.745	0.600-0.710
30#	0.625	0.500-0.600
36#	0.525	0.425-0.500
40#	0.438	0.355-0.425
46#	0.370	0.300-0.355
54#	0.310	0.250-0.300
60#	0.260	0.212-0.250
70#	0.218	0.180-0.212
80#	0.185	0.150-0.180
90#	0.154	0.125-0.150
100#	0.129	0.106-0.125
120#	0.109	0.090-0.106
150#	0.082	0.063-0.075
180#	0.069	0.053-0.075
220#	0.058	0.045-0.063

 

 

JIS粒度	D0值(um)	D3值(um)	D50值(um)	D94值(um)
240#	≤ 127	≤ 103	57.0±3.0	≥ 40
280#	≤ 112	≤ 87	48.0±3.0	≥ 33
320#	≤ 98	≤ 74	40.0±2.5	≥ 27
360#	≤ 86	≤ 66	35.0±2.0	≥ 23
400#	≤ 75	≤ 58	30.0±2.0	≥ 20
500#	≤ 63	≤ 50	25.0±2.0	≥ 16
600#	≤ 53	≤ 41	20.0±1.5	≥ 13
700#	≤ 45	≤ 37	17.0±1.5	≥ 11
800#	≤ 38	≤ 31	14.0±1.0	≥ 9.0
1000#	≤ 32	≤ 27	11.5.±1.0	≥ 7.0
1200#	≤ 27	≤ 23	9.5±0.8	≥ 5.5
1500#	≤ 23	≤ 20	8.0±0.6	≥ 4.5
2000#	≤ 19	≤ 17	6.7±0.6	≥ 4.0
2500#	≤ 16	≤ 14	5.5±0.5	≥ 3.0
3000#	≤ 13	≤ 11	4.0±0.5	≥ 2.0
4000#	≤ 11	≤ 8.0	3.0±0.4	≥ 1.8
6000#	≤ 8.0	≤ 5.0	2.0±0.4	≥ 0.8
8000#	≤ 6.0	≤ 3.5	1.2±0.3	≥ 0.6

 

 

应用场景：

 

铝合金、锌合金等有色金属喷砂钝化。

金属件喷砂，除锈，喷涂准备等表面处理。

彩嵌玻璃、装饰玻璃喷砂雾化。

牙科假牙喷砂钝化，粘接前处理。

陶瓷瓷砖等材料表面处理。

厨具炊具喷砂流水线。

木制家具、竹制物品喷砂表面处理。

不锈钢、合金钢、铸钢喷砂蚀刻。

复合材料、塑胶产品表面喷砂清理。

半导体、半导体封装设备微喷砂。

Non ferrous metals such as aluminum alloys and zinc alloys are sandblasted and passivated.

Surface treatment such as sandblasting, rust removal, and spray coating preparation for metal parts.

Color embedded glass and decorative glass sandblasting and atomization.

Dental dentures sandblasting and passivation, pre bonding treatment.

Surface treatment of materials such as ceramic tiles.

Kitchen utensils sandblasting assembly line.

Sandblasting surface treatment for wooden furniture and bamboo items.

Stainless steel, alloy steel, and cast steel sandblasting and etching.

Surface sandblasting cleaning of composite materials and plastic products.

 

Semiconductor and semiconductor packaging equipment micro sandblasting.