首页 产品 新闻 介绍 留言

开关电源工业电源LED电源功放电源

产品信息

产品详细

1.产品说明(Product description

精佳达科技\精达电源产品生产多年,机壳型AC/DC电源供应器已广为市场采用。体小、易安装于较小机内空间,并具有较小待机符合能源之星要求,具有CE安规认证,强耐环境性、过压过流短路完善的保护,本产品采用自动化设备制造,高标准满载高温老化ATE智能化测试设备,产品质保三年。产品广泛应用工业自动化、LED显示屏、工业控制、电子仪器JINGJIADA TECHNOLOGY & JINGDA POWER PRODUCTS HAVE BEEN produced for many years, and the case type power supply unit has been widely used in the market. The machine is small in size, easy to install in a very small machine space, and has a very small standby power consumption in line with the energy star requirements, with CE safety certification, strong environmental resistance, over-voltage, over-current, short circuit protection, this product is manufactured with automated equipment, 高标准 full load high temperature aging, ATE intelligent test equipment, product quality guarantee for three years. Products are widely used in industrial automation, LED display screen, industrial control, electronic instruments.

2.产品参数特性:(Parameter characteristics of product

产品型号(model:JRS-150-5

直流输出范围DC output range):5.0 V, 022 A

输出电压精度 Accuracy of output voltage):?2%

纹波Ripple wave):100mVp-p

效率Efficiency):90%

LED指示工作状态:Led indicates working status

输入电压范围 (Input voltage range): 85264VAC/120373VDC

空载损耗<0.2No-load loss & Lt; 0.2 W

自然通风冷却Natural Ventilation Cooling

输入浪涌电流冷启动:230V时为30AInput surge current, cold start,30A at 230V

电压调整范围Voltage range:4.55.8V

启动上升保持时间Start-up and hold time 230VAC满载时Full load500ms,30ms,30ms/115VAC满载时Full load500ms,30ms,12ms

漏电流Leakage current):<0.75mA / 240VAC

过载保护 过电流点在110%150%,自动检测,自动恢复(Overload protection, over-current point in 110% ~ 150% , automatic detection, automatic recovery

过电压保护 6.57.5V时关断输出电压. Turn off the output voltage when overvoltage protection is 6.5 ~7.5v

绝缘特性Insulation characteristic  输入端与输出端间:3.75KVAC,输入端与外壳间:2KVAC,输出端与外壳间:0.5KVAC 1分钟Input and output: 3.75KVAC, input and Shell: 2KVAC, output and Shell: 0.5KVAC 1 minute

工作温度Operating temperature  -30 70℃

可用于海拔5000地区Can Be used at 5,000 elevation

电磁兼容标准EMC Standard  EN61000-4-2,3,4,5,6,8,11,EN61000-6-2(EN50082-2)

接线方式Connection Mode 7P/9.5mm端子排Terminal Block

外形尺寸Contour dimension 134?97?30mm(??)Length, width and height

机壳号Case number JD-GY-150

重量及包装Weight and packing  0.4公斤/(Kg / only)

3.警示(Warning

防范触电及烧伤,请勿拆除电源外壳.Please do not remove the power supply case to prevent electric shock and burn.

不能将电源安装在潮湿环境和近水源处.Do not install the power supply in a humid environment or near the water source.

不能将电源暴露在高温环境和近火源处.Do not expose power source to high temperature and near fire source.

输出电压和输出电流不能超出规格书所规定的额定值范围.The output voltage and output current can not exceed the rating range specified in the specification.

接地线(FG)必须与大地连接The grounding FG must be connected to the earth


联系方式

相关产品

广州精佳达电子科技有限公司 > 铝产品 > 开关电源工业电源LED电源功放电源
拨打电话 立即询盘